The correct shutdown process of the film blowing m
Article Source:This siteData:2020-07-16
The correct shutdown process of the film blowing machine:
1 Turn off the power switch of the corona processor first.
2 Turn off the heater switch on the die and the body.
3 Run each extruder at a low speed to cool the extruder and die head slowly.
4 After the temperature of each temperature control meter drops below 135°C, stop the operation of the extruder and turn off the up and down traction and rewinding switches. Turn off the power switch and turn off the compressed air switch.
5 Unload, weigh, pack and store the film on the reel.
6 Clean up the leftover materials of each extruder, and clean the ground and equipment.
Proper shutdown can prolong the service life of the film blowing machine.